Head of the Department: Dr. Ramakrishna N. Hegde

Before Joining SIT
International Journals:

• 1
  Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy, “Flow visualization, critical heat flux enhancement and transient characteristics in pool boiling using nanofluids”,Journal of ASTM International (JAI), Vol. 9, No. 5,2012, Paper ID JAI104443.
• 2
  Ramakrishna Hegde, Shrikantha S.Rao, R.P.Reddy “Investigations on boiling induced nanoparticle coating, transient characteristics and effect of pressure in pool boiling heat transfer on a cylindrical surface”, Experimental Heat Transfer, Taylor & Francis, (2014 Impact factor 0.425, 5-Year Impact factor 0.802, H –INDEX – 20).
• 3
  Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy,“Boiling induced nanoparticle coating and its effect on pool boiling heat transfer on a vertical cylindrical surface using CuO nanofluids”, Heat and Mass Transfer, Springer – Verlag Publications, DOI 10.1007/s00231-012-0996-8, published online: 07 April 2012 ( 2014 Impact factor 0.929,H –INDEX – 35).
• 4
  Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy, “Investigations On Heat Transfer Enhancement In Pool Boiling With Water-CuO nanofluids” Journal of Thermal Science, Springer -Verlag publications,21(2), 179 -183, 2012( 2014 Impact factor 0.348, H –INDEX – 12).
• 5
  Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy, “Flow visualization and study of CHF enhancement in pool boiling with Al2O3 – water nano-fluids”, Thermal Science – International Scientific Journal, DOI: 10.2298/TSCI100511095H (2014 Impact factor 0.962,H –INDEX – 12).
• 6
  Ramakrishna Hegde, Shrikantha S.Rao, R.P.Reddy, “ Studies on Nanoparticle Coating due to Boiling Induced Precipitation and Its Effect on Heat Transfer Enhancement on a vertical cylindrical surface”, Experimental thermal and Fluid Science- Elsevier publications, 38, 229 –236, 2012 (2014 Impact factor 1.267, 5-Year Impact factor 2.08, H –INDEX – 54).
• 7
  Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy, “Experimental studies on CHF enhancement in pool boiling with CuO-water nanofluid”, Heat and Mass Transfer,Springer-Verlag Publications, DOI 10.1007/s00231-011-0955-9, published online: 03 Jan 2012 ( 2014 Impact factor 0.929,H –INDEX – 35).
• 8
  Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy, “ Experimental Study On CuO Nanoparticles in Distilled Water and its Effect On Heat Transfer”,International Journal Of Nanoparticles, Inderscience Publications-Switzerland, 5(1), 16-36, 2012(H –INDEX – 5).
• 9
  Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy, “Experimental study on CuO nanoparticles and its effect on heat transfer on a vertical surface”, Journal of Mechanical Science and Technology,Springer -Verlag publications,25 (11) 2927~2934, 2011. (2014 Impact factor 0.932, 5-Year Impact factor 1.200, H –INDEX – 20).
• 10
  Ramakrishna Hegde, Shrikantha S.Rao, R.P.Reddy, “Role of surface roughness in pool boiling with alumina-water nanofluid on a horizontal wire surface”, Journal of Heat and Technology, 29(1):165-171, 2011, ETS printers, Italy.(2014 H –INDEX – 14).
• 11
  Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy, ” Behavioural study of Alumina nanoparticles in pool boiling heat transfer on a vertical surface”, Heat Transfer Asian Research,Wiley- Blackwell, International Journal,40(6), 483–576, 2011. (2014 – H –INDEX – 12).
• 12
  Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy, “ A Comparative Study Of Heat Transfer Enhancement in Pool Boiling with CuO and Alumina Nanofluids”, International Journal of Nanotechnology and Applications, , RI publications, 5(1), 2011.
• 13
  . Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy, “Critical heat flux enhancement in pool boiling using Alumina Nanofluids”, Heat transfer Asian Research,Wiley- Blackwell, International Journal, 39(5), 323 – 331, 2010. (2014, H –INDEX – 12).
• 14
  Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy, “Pool boiling heat transfer characteristics and flow visualization of Al2O3 – water nano-fluids”, International Journal of Mechanical and Automotive Engineers, 8(3), 34-39, 2010.

International Conferences:

• 1
  Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy, “Experimental Investigations of Pool Boiling Heat Transfer Characteristics on a Vertical Surface Using CuO Nanoparticles in Distilled Water”, International Conference On Thermal Energy and Environment, INCOTEE 2011,Kalasalingam University, Tamilnadu, March 24 – 26, 2011
• 2
  Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy,“ Heat transfer performance of a newly designed compact heat exchanger using alumina nanofluid” International Conference On Design and Advances in Mechanical Engineering, ICDAAME-2011, SKP Engineering College, Tiruvannamalai, Tamilnadu, December 16 – 17, 2011
• 3
  Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy, “Investigations on heat transfer enhancement using CuO –Water nanofluids” ,International conference at Chennai , ICFET-2010 ,Saveetha University, Chennai, April 29,30 2010
• 4
  Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy, “Experimental investigation on heat transfer enhancement using Alumina –Water Nanofluids” International conference on Frontiers In Mechanical Engineering, FIME 2010, May 20, 21,22 2010
• 5
  Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy, “Flow visualization in pool boiling with Al2O3 – water nanofluid on a horizontal test surface and its effect on CHF enhancement” International Conference AMMMT-2010, SIT Tumkur,Nov,18-19-2010
• 6
  Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy,“ A Comparative Study Of Heat Transfer Enhancement in Pool Boiling with CuO and Alumina Nanofluids” International conference,ICTT-2010,College of Engineering, Trivandrum, Nov 24,25,26-2010
• 7
  Ramakrishna Hegde, Shrikantha S. Rao, R. P. Reddy, “Forced convection heat transfer of Nanofluids-Current research Scenario” International conference On Emerging research and advances in mechanical Engineering, ERA-2009, Velammal College of Engineering, Chennai, March 19-21, 2009

After Joining SIT
Journal publication:

• 1
  Performance, emission, and exergy analysis of an IDI dual swirl combustor diesel engine with blended waste Chia seed oil as a biofuel, Taylor & Francis, 0891-6152, 2022.
• 2
  Heat transfer studies on double tube heat exchanger with combined effect of propeller insert and water-based GO and Al2O3 nanofluids, Proceedings of the Indian Academy of Sciences, 0253-4142 / 0973-7685, 2022
• 3
  Investigation on the performance of an IDI engine using a novel dual swirl combustor, MATERIALS TODAY, 2021.
• 4
  Characterization of Chia seed oil methyl ester as an alternate fuel for diesel engine, IOP PUBLISHING LTD, 2053-1583, 2021.
• 5
  An Investigation On The Performance And Viability Of A Hybrid Twisted Blade Profile For A Horizontal Axis Micro Wind Turbine", Materials Today: Proceedings, Elsevier Publications, https://doi.org/10.1016/j.matpr.2021.06.288
• 6
  Ramakrishna N. Hegde, Thermal performance enhancement of a helical coil- in -shell heat exchanger with circular finned turbulator and Alumina nanofluid- An experimental study and correlation development, Journal of Enhanced Heat Transfer, ISSN 1065-5131, January 2021
• 7
  Ramakrishna N. Hegde, Investigations on the effect of disturbed flow using differently configured turbulators and Alumina nanofluid as a coolant in a double tube heat exchanger, Taylor & Francis, ISSN- 0891-6152, 44166.
• 8
  Ramakrishna N. Hegde, Thermal performance enhancement studies on a circular finned coil in shell heat exchanger using graphene oxide nanofluid, Springer Nature Applied Sciences, ISSN- 2523-3971, August 2020.
• 9
  Ramakrishna N. Hegde, Niranjan Rai, “A Modified Correlation to Predict Heat Transfer Coefficient in a Horizontal ‘Coil in Shell Heat Exchanger’ with and without Circular Fins Using Nanofluids” Journal of physical and chemical reference data, AIP Conference proceedings 2236, 030009 (2020).
• 10
  Shankara Murthy H.M. , Ramakrishna N. Hegde, “Investigations on thermal characteristics in a double pipe fitted with circular finned and frequently spaced helical twisted inserts and Graphene oxide nanofluid”, Heat and Mass Transfer, Springer(Accepted for Publication, May, 20, 2020
• 11
  Ramakrishna N. Hegde and Jagadeesh Bantwal, “Engine Performance and Emission studies with Cotton seed –Simarouba and Cotton seed-Mahua oil blends as a partial replacement Bio-Fuel”, SCOPUS indexed lecture series in Mechanical Engineering published by Springer
• 12
  N. T. Hegde, D. Pai and R. Hegde, “Heat treatment and mechanical characterization of LM-25/tungsten carbide metal matrix composites”, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2019.08.136
• 13
  S Adithya, Vijayakumar Patil, Shankaragoud Biradar, Nagarjun R, Ramakrishna N Hegde, Shankar Murthy H.M, “Numerical investigation on heat transfer augmentation using alumina nano fluid and metallic inserts in double pipe heat exchanger”, Journal of Emerging Technologies and Innovative Research, Volume 6, Issue 6, ISSN: 2349-5162, June 2019, pp265-270.
• 14
  Niranjan Rai, Ramakrishna N. Hegde, “ Investigations on Heat Transfer Enhancement in Helical Coil Heat Exchanger Using CuONanofluid”, International Journal Of Engineering Trends andTechnology, ISSN: 2231-5381, Special Issue, May 2016, pp52-55,
• 15
  Ramakrishna N. Hegde, Ashok Gond, “Characterization and Suitability of MahuaCotton Seed Oil Blends as an Alternate Fuel for CI Engine”, International Journal Of Engineering Trends andTechnology, ISSN: 2231-5381, Special Issue, May 2016, pp56-62,
• 16
  Ramakrishna N. Hegde, Jagadish B., “Performance and Emission Characteristics of Cotton seed and Simarouba Oil Blend on a Single Cylinder Four Stroke CI Engine”, International Journal Of Engineering Trends andTechnology, ISSN: 2231-5381, Special Issue, May 2016, pp 130-135.
• 17
  Manjunath S., Ramakrishna N. Hegde, “Performance and Emissions characteristics of Biodiesels in IDI Diesel Engines – A review”, International Journal Of Engineering Trends andTechnology, ISSN: 2231-5381, Special Issue, May 2016, pp 179-183.
• 18
  Ramakrishna Hegde, Shrikantha S.Rao, R. P. Reddy, “Experimental investigations of pool boiling heat transfer characteristics on a vertical surface using CuO nanoparticles in distilled water”, Heat Transfer Engineering (HTE), Taylor and Francis Journal,Volume 35, Issue 14-15, 2014, pp- 1279-1281, (2014 Impact factor 0.902, 5-Year Impact factor 1.200, H –INDEX – 34).
• 19
  Srinath J., Ramakrishna N. Hegde, “Technologies of sulphur dioxide reduction in coal fired thermal power plant”, International Journal of Mechanical Engineering & Technology (IJMET), Volume 5, Issue 9, 2014
• 20
  Dr Ramakrishna N. Hegde, Jagadeesh Bantwal, “ Characterization of Cotton Seed and Simarouba Oil Blend and Exploration of its Suitability as an Alternate Fuel for CI Engine”, Asian Journal of Engineering and Technology (ISSN: 2321 – 2462)Volume 03 – Issue 04,468-479, Special issue for ICETTAS’15

Conference publication

• 1
  A comparative analysis of energy using dual blends of Biodiesel in a DI engine, Global Conference on Recent Advances in Sustainable Materials (GC-RASM 2022), 2022.
• 2
  Investigation on the Performance of an IDI engine using a Novel Dual Swirl Combustor, Smart and Sustainable Developments in Materials, Manufacturing and Energy Engineering (SME 2021), 1369-7021 / 1873-4103, 2022
• 3
  Ramakrishna N. Hegde “An Investigation On The Performance And Viability Of A Hybrid Twisted Blade Profile for a Horizontal Axis Micro Wind Turbine" 2021 Global Conference on Recent Advancements in Sustainable Materials - GC-RASM 2021, July 29-30,2021
• 4
  Ramakrishna N. Hegde “Effect of Injection Pressure and Injection Timing on The Performance And Emission Characteristics Of CI Engine Using Vataria Indica Biodiesel", 3rd International Conference on ADVANCES IN MECHANICAL ENGINEERING AND NANOTECHNOLOGY - ICAMEN2021, NIT Uttarakhand, Manipal -Jaipur University, Feb 28, 2021
• 5
  Ramakrishna N. Hegde ” Exergy Analysis, Performance, and Emission characteristics comparison of a Single and a Novel Dual swirl chamber in an IDI engine", 3rd International Conference on ADVANCES IN MECHANICAL ENGINEERING AND NANOTECHNOLOGY - ICAMEN2021, NIT Uttarakhand, Manipal -Jaipur University, Feb 28, 2021
• 6
  Ramakrishna N. Hegde , Niranjan Rai and Jagadeesh Bantwal, “ Investigations on the effect of combined augmentation technique using circular fins and Graphene oxide nanofluid in a helical coil in shell heat exchanger ” , 9th International Engineering Symposium - IES 2020 ,March 3-5, 2020, Kumamoto University, Japan, pp. M3-3-1-M3-3-7
• 7
  Ramakrishna N. Hegde, Shankara Murthy.H.M “Investigations on heat transfer and friction factor characteristics of Graphene Oxide/water through A Heat Exchanger with Turbulator propeller insert”, 25 th National and 3 rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019), December 28-31, 2019, IIT Roorkee, Roorkee, India.
• 8
  Niranjan Rai , Ramakrishna N. Hegde, “Experimental Study of the Conjoint Effect of Fins and GO Nanofluids on the Performance of a Helically Coiled Heat Exchanger”, 25th National and 3 rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019), December 28-31, 2019, IIT Roorkee, Roorkee, India
• 9
  Ramakrishna N. Hegde and Jagadeesh Bantwal, “Engine Performance and Emission studies with Cotton seed –Simarouba and Cotton seed-Mahua oil blends as a partial replacement Bio-Fuel”, 26th National Conference on Internal Combustion Engines and Combustion (NCICEC 2019),National Institute of Technology, Kurukshetra, November 1 – 4, 2019 and accepted for SCOPUS indexed lecture series in Mechanical Engineering published by Springer
• 10
  Ramakrishna N. Hegde, Manjunath S,” Numerical and Experimental Simulation Studies of Combustion in IDI Diesel Engine - A Review, National Conference on Emerging Trends in Science and Engineering (NCETSE 2018), 27 and 28 April 2018, Sri Madhwa Vadiraja Institute of Technology & Management, Bantkal, Udupi
• 11
  Ramakrishna N. Hegde, Shankara Murthy.H.M, “Heat Transfer Augmentation of Double Tube Heat Exchanger with Twisted Tape Inserts and Al2O3 /Water Nanofluid: An Experimental Study and Correlation Development”, ICCMEH 2017 , 4 th International Conference on Computational Methods in Engineering and Health Sciences, December 19-20, 2017 held at MIT, Manipal, Karnataka
• 12
  Ramakrishna N. Hegde, Niranjan Rai, “A Modified Correlation to Predict Heat Transfer Coefficient in a Horizontal ‘Coil in Shell Heat Exchanger’ with and without Circular Fins Using Nanofluids” ICCMEH 2017 , 4 th International Conference on Computational Methods in Engineering and Health Sciences, December 19-20, 2017held at MIT, Manipal, Karnataka
• 13
  Niranjan Rai, Ramakrishna N. Hegde, “ Investigations on Heat Transfer Enhancement in Helical Coil Heat Exchanger Using CuONanofluid”, National Conference on Advances in Mechanical Engineering Science (NCAMES-2016), Srinivas Institute of Technology, Mangalore, May 2016, pp52-55,
• 14
  Niranjan Rai, Ramakrishna N. Hegde, “Characterization and Suitability of MahuaCotton Seed Oil Blends as an Alternate Fuel for CI Engine”, National Conference on Advances in Mechanical Engineering Science (NCAMES-2016), Srinivas Institute of Technology, Mangalore1, May 2016,, pp52-55,
• 15
  Ramakrishna N. Hegde, Jagadish B., “Performance and Emission Characteristics of Cotton seed and Simarouba Oil Blend on a Single Cylinder Four Stroke CI Engine”, Srinivas Institute of Technology, Mangalore1, May 2016,, pp 130-135.
• 16
  Ramakrishna N. Hegde and Jagadeesh Bantwal, “Characterization of Cotton Seed and Simarouba Oil Blend and Exploration of its suitability as an Alternate Fuel for CI Engine”, 2nd International Conference on Emerging Trends in Technology & Applied Sciences, SAINTGITS CLLEGE OF ENGINEERING, Kottaym, Kerala, India, 2nd May 2015.
• 17
  Ramakrishna N. Hegde, Jitin, M., “ Innovative Wind Energy Generation by INVELOX” International conference on Mechanical and Production Engineering (ICMPE), pp. 158-162, Cochin, 19th April, 2015.
• 18
  Ramya, M., Ramakrishna N. Hegde,“ Performance evaluation and optimization Of ZGM123n coal mill at thermal power Plant” in Proceedings of the 2nd International Conference on Current Trends in Engineering and Management ICCTEM-2014 17 – 19, pp. 362-367, July 2014, Mysore, Karnataka, India.
• 19
  Ramya, M., Ramakrishna N. Hegde, “Study on Setting the Performance Parameters of Coal Mill for Optimum Results” International Conference on Emerging Trends in Engineering (ICETE -2014) , pp. 151-157, NITTE 15th – 17th May, 2014
• 20
  Ramya, M., Ramakrishna N. Hegde, “Study on Setting the Performance Parameters of Coal Mill for Optimum Results” International Conference on Emerging Trends in Engineering (ICETE -2014) , pp. 151-157, NITTE 15th – 17th May, 2014
• 21
  Srinath J., Ramakrishna N. Hegde, “Evaluation of Effectiveness and Flue Gas – Liquid Transfer in Flue Gas Desulphurization Plant” ,in International Conference on Emerging Trends in Engineering (ICETE -2014) , pp. 158-162, NITTE 15th – 17th May, 2014.

Faculty Name: Jerome Anthony
Before Joining SIT

International Journals:

• 1
  Jerome Anthony and Dr. Shrinivas Mayya D “license plate recognition using neural network” Baselios Mathews emerging technology, ICETT . 529-551 Feb 2012.

• 2
  Jerome Anthony “Chassis Dynamometer” in “National Conference on Advanced Mechanical Engineering and Sciences”, 7th May 2016 pp. 136 -137.
• 3
  Jerome Anthony “Low cost chassis Dynamometer” , International Conference on Emerging Technology Trends In Advanced Engineering Research May 2015
• 4
  Jerome Anthony “Design and modification of electric motor cycle with progressive transmission” , 5th national conference on topical transcend in mechanical technology TTMT-17, May 2017.
• 5
  . “Experimental study on physical and chemical behavior of modified neem oil for lubrication of transmission system” 5th national conference on topical transcend in mechanical technology TTMT-17 May 2017.
• 6
  . Jerome Anthony “Tribological behavior of AISI 1055 under formulated vegetable oils for automotive applications”, 10 th International Conference on Industrial Tribology – India Trib 2019, Indian Institute of Science (IISc), Bangalore, December 2019.

Faculty Name: Amit Kumar H
After Joining SIT

International Journals:

• 1
  1. Amitkumar.H. “Energy Absorption Analysis of Rupd.” The International Journal of Research in Engineering and Technology, vol. 04, e-ISSN:2319-1163, p-ISSN:2321-7308, Feb.
• 2
  Amitkumar.H. “Effect of Graphite on Tribological Behaviour of PTFE Composites” The International Journal of Research in Science, Engineering and Technology, vol. 06, e-ISSN: 2319-8753, p-ISSN: 2347-6710, DEC. 2017.
• 3
  Amitkumar.H. “Potential of Coconut Spathe in Composites: A Review” The International Journal of Innovative Research in Technology, vol. 05, e-ISSN: 2349-6002, June. 2018.
• 4
  Amitkumar.H. “Tribological Behavior of PTFE Composites – A Review” The International Journal of Research and Analytical Reviews, Approved by UGC, vol. 05, e-ISSN: 2348 –1269, p-ISSN: 2349-5138, OCT. – DEC. 2018.
• 5
  Amitkumar.H. "BIO-DIESEL FROM CASHEW NUT SHELL OIL", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN: 2349-5162, Vol.6, Issue 5, page no. pp160-164, May-2019.
• 6
  Amitkumar H, "A REVIEW PAPER ON BIODIESEL FROM CASHEW NUT SHELL OIL", IJRAR - International Journal of Research and Analytical Reviews (IJRAR), E-ISSN 2348-1269, P- ISSN 2349-5138, Volume.6, Issue 1, Page No pp.350-352, March 2019.

Faculty Name: Girish A R
Before Joining SIT

• 1
  Girish A R, “Modeling & Simulation of Thermal Hydraulic Systems” under TEQIP-II on 15th& 16th April 2013 at Dr.AIT, Bangalore.

After Joining SIT

International Journals:

• 2
  Girish A R, “Review on Experimental Analysis of Pulse Detonation Engine and Its Merits”, International Journal of Engineering Trends and Technology, ISSN: 2231-5381, May 2016, Page 144-148.
• 3
  Girish A R, “CFD Simulation of Centrifugal Blower Using ANSYS CFX”, International Journal of Engineering Trends and Technology (IJETT), ISSN: 2231-5381, May 2016, Page 34-38.
• 4
  Girish A R, “Experimental Investigation of Biolubricant Formulated from Chemically Modified Castor Oil”, Topical Transcend in Mechanical Technology (TTMT), “International Digital library of technology and research” (Scopus Indexed), May 2017.
• 5
  Girish A R, Shashidhara Y M, “Vegetable oils as an alternative to Mineral oil in Automotive Lubrication- A Review”, 9th International Conference on Industrial Tribology (ICIT-2017), December 2017.
• 6
  Girish A R, Abhishek T P, Avinash T, Rakesh R, ”Fabrication of Integrated Braking Assistance” International journal of Innovative research in Technology”, ISSN: 2349-6002, Volume 5, Issue 12, May 2019, PP 663-665.
• 7
  Girish A R, Sunny S Dsouza, Jayantha, Parth hegde, Manish Y, “Bio fuel as a Surrogate fuel to Mineral oil- A review”, International Journal of Pollution and Noise Control. www.stmjournals.com.
• 8
  Girish A R, “Capability of Biodiesel as an Alternative fuel- A review”, International journal of Innovative research in Technology”, ISSN: 2349-6002, Volume 4, Issue 12, May 2018, PP 924-929.
• 9
  Girish A R, Shashidhara Y M, “Experimental study on performance and emission characteristics of four stroke gasoline engine under formulated coconut oil as base lubricant”, National Conference on Emerging Trends in Mechanical Engineering, June 2019.
• 10
  Girish A R, Shashidhara Y M, Ashoka G U “Formulated Pongamia oil as an engine Lubricant for Four Stroke Spark Ignition Engine Operation”, National Conference on advances in Science, Engineering and management (NCASEM-2019) on August 23 and 24th 2019.
• 11
  Girish A R, Shashidhara Y M, Jerome Anthony “Tribological Behavior of AISI 1055 under Formulated Vegetable Oils for Automotive Applications”, 10th International Conference on Industrial Tribology on December 1st- 4th, 2019.
• 12
  Girish A R, Shashidhara Y M, “Study on Performance and Emission Characteristics of Four stroke Gasoline engine under Formulated Neem oil as base lubricant” in International Conference on Trends in Mechanical Engineering Sciences (ICTMES – 2020), August 2020.

Faculty Name: Varun N
After Joining SIT

• 1
  Varun N, “A review on experimental analysis of Pulse detonation engine & its merits” paper presented in Two Day National Conference on advances in Mechanical Engineering Sciences at Srinivas Institute of technology, Mangalore
• 2
  Varun N, “ CFD simulation of centrifugal blower using ANSYS CFX” paper presented in Two Day National Conference on advances in Mechanical Engineering Sciences at Srinivas Institute of technology, Mangalore
• 3
  Varun N, “Utilization of exhaust heat from IC engine for Air conditioning in Vehicle” International journal of research and analytical reviews, ISSN-2349-5138, Vol 6, March 2019
• 4
  Varun N, “Utilization of exhaust heat from IC engine for Air conditioning in Vehicle” Journal of emerging technologies and innovative research ISSN 2349-5162, Vol 6, May 2019
• 5
  Varun N, “Design and development of hyperloop train” Internation Journal of research in engineering science and Management, ISSN 2581-5792, Vol 3, March 2020.
• 6
  Varun N, “Design and development of hyperloop train” International Research Journal of modernization in engineering technology and science, ISSN-2582-5208, Vol 2, March 2020
• 7
  Varun N, “Power assist wheelchair for physically challenged person” Journal of emerging technologies and innovative research, ISSN 2349-5162, Vol 8, August 2021.

Faculty Name: Prakash S T
After Joining SIT

International Journals:

• 1
  Prakash S T, Vidyasagar N, Vignesh G,Tippanna kolli, Design And Fabrication of Power Windows For Buses, IJRAR- International Journal of Research and Analytical Reviews, E ISSN 2348 –1269, PRINT ISSN 2349-5138.
• 2
  Prakash S T,Avinash, Santosh, Abhilash, Tribological Behavior of PTFE composites, IJRAR: International Journal of Research and Analytical Reviews, ISSN: 2348-1269.
• 3
  Prakash S T, Avinash, Amit kumar, Ramaswamy, Effect of Graphite on Tribological behavior of PTFE Composites, IJIRSET: International Journal of Innovative Research On Science, Engineering And Technology, ISSN: 2319-8753| PISSN: 2347-6710.
• 4
  Prakash S T,Devadiga N, Development in Research Work of Compressed Air Powered Engine by Increasing Its Air Efficiency, IJSRD: International Journal for scientific Research & Development, ISSN:2321-0613
• 5
  Prakash S T, Ismail Khan, Chethan K M, Avinash H S, Power Generation By Utilizing Repulsions of Permanent Magnets For Small Scale Applications, IJRET: International Journal of Research in Engineering and Technology eISSN: 2319-1163 | pISSN: 2321-7308.
• 6
  Presented and published a paper at a National Conference on “Design and Fabrication of a small vehicle bumper to improve Safety and Damage Reduction” hosted by Vivekananda College of Engineering and Technology, Puttur, Karnataka, held on 16 th May 2018 (ISBN: 978-81-934215-1-2).
• 7
  Prakash ST, “Modified Compact Weed Removal Machine” in International Research Journal of Modernization in Engineering Technology and Science (IRJMETS), Volume 2, Issue 9, September 2020.

Faculty Name: Ramaswamy M P
Before Joining SIT

• 1
  Ramaswamy M P, Assoc prof Mahesh B Davangeri, “Investigation on the effect of heat treatment on impact, hardness and tribological behavior of AISI 316L DSS ”, International Conference on Mechanical & Industrial Engineering, 02nd June-2013, Bengaluru, ISBN: 978-93-83060-05-4.
• 2
  Ramaswamy M P, Assoc prof Mahesh B Davangeri,“Investigation on the effect of heat treatment on impact, hardness and tribological behavior of AISI 2507 DSS ”, National Conference on Innovation in Mechanical Engineering “NCIME”, 21nd and 22rd June-2013, madanapalle.

After Joining SIT

International Journals:

• 1
  Ramaswamy M P. “Investigation on the Effect of Heat Treatment on Microstructure and Tribological Behavior of AISI 2507 DSS” The International Journal of engineering trends and technology (IJETT), vol. ISSN, pp. 2231-5381, 6th and 7th MAY. 2016, Srinivas Institute of Technology, Mangaluru