Dr. RAGHAVENDRA M J
Education Details
| Degree | Institution | Specialization | University | Year |
| B.E | K.I.T, Tiptur | Mechanical Engg | VTU | 2009 |
| M.Tech | SJCE, Mysore | Maintenance Engg | VTU(Autonomous) | 2012 |
| Ph.D. | SIT, Mangaluru | Optimization | VTU | 2021 |
Experience Details
| Field | Designation | Workplace | From | To |
| Teaching | Associate Professor | Srinivas Institute of Technology | 2021 | Till Date |
| Teaching | Assistant Professor | Srinivas Institute of Technology | 2013 | 2021 |
| Research | Research Scholar | Srinivas Institute of Technology | 2015 | Till Date |
| Industry | supervisor | Sri Jagadamba Automobiles, Hassan | 2012 | 2013 |
| Industry | Project Engineer Trainee | TVS motors ltd, Mysuru | 2011 | 2012 |
| Industry | Graduate Engineer Trainee | Triton valves ltd, Mysuru | 2010 | 2010 |
Subjects Handled
| Mechanical Vibrations , Dynamics of machines , Kinematics of machines , Fluid power system , control engineering and automation , Elements of Mechanical Engineering , Hydraulics and pneumatics , Computer Aided Engineering Drawing , Computer Aided Machine Drawing , Marine Manufacturing Technology , Biomass energy system , Non-destructive Testing , Power Plant Engineering , Non-traditional Machining , Energy Engineering , Total Quality Management , Foundry Technology , Production/Operations Management and Operations Research , Additive Manufacturing , Technology and operation staregey.programmable logic control. Mechatronics and its application , Pneumatics and hydraulic control. Operation Management |
Area of Interest
| Condition Monitoring , Machining Techniques , Optimization Parameters , Smart Materials. Fracture technology. |
Publications in Journals
| National Journal | |
| 1 | Paper Published of Title “optimization of Machining process parameters for Titanium grade-5 using Taguchi’s method”, at National conference on Recent Trends & Innovations in Mechanical Engineering & Technology (RTIMET-2019) Cambridge Institute of Technology, Bengaluru, Karnataka, India, 3-4 May 2019. |
| 2 | Paper Published of Title “optimization of turning process parameters for Titanium grade-5 using Taguchi’s method”, at National conference on Recent Advances in Mechanical Engineering and Technology (NCRAMET-19), Yenepoya Institute of Technology, Moodbidri, Mangaluru, Karnataka, India, 29-30 April 2019. |
| 3 | Paper Published of Title “Effect of Total Productive Maintenance Implementation in Manufacturing and Service Industries- A Review”, Proceedings of the National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016), Srinivas Institute of Technology, Valachil, Mangaluru, Karnataka, India, 6-7 May 2016. |
| 4 | Paper Published of Title “A study on Different Tool Condition Monitoring System Available to Monitor Tool-Flank Wear”, Proceedings of the National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016), Srinivas Institute of Technology, Valachil, Mangaluru, Karnataka, India, 6-7 May 2016 |
| International Journal | |
| 1 | Paper Published Titled “Improvement of Performance and Efficiency of Modified Vertical Axis Wind Turbine By Implementing A Magnetic Propelling Phenomenon Of Permanent Magnets”, In International Journal Of Scientific Research In Engineering And Management (Ijsrem), Volume: 06 Issue: 07 | July - 2022 Impact Factor: 7.185 Issn: 2582-3930 |
| 2 | Paper Published Titled “Prevention of Railway Accidents by Automatic Gate Control using IoT”, in International Research Journal of Engineering and Technology (IRJET) Volume 8, Issue 8, August 2021 https://www.irjet.net/volume8-issue8 S.No: 474 |
| 3 | Paper Published Titled “Optimization of EDM Electrode by Direct Metal Laser Sintering (DMLS) method for SS316L Material in IOP Conference Series: Materials Science and Engineering. iopscience.iop.org/article/10.1088/1757-899X/1013/1/012001. |
| 4 | Paper Published Titled “Optimization of surface roughness of Titanium Gr-9 Alloy Turning using Taguchi method in IOP Conference Series: Materials Science and Engineering. iopscience.iop.org/article/10.1088/1757-899X/1013/1/012001. |
| 5 | Paper Published Titled “Tool Wear Behaviors of CVD -Coated Carbide Inserts During Dry Machining of Titanium Grade-5 (Ti-6Al-4V) Materials in International Journal of Electro Mechanics and Page 8 Mechanical Behavior. -ISSN: 2582-4120 Vol. 6: Issue 1, March 2020 Page No. V7I1303. |
| 6 | Paper Published Titled “Overall Equipment Effectiveness of a Mechanical Press in a Manufacturing Unit- A Case Study” in the Global Conference on “Advanced Smart and Sustainable Technologies in Engineering (GCASSTE-2020)”, organized by Mangalore Institute of Technology & Engineering, Moodbidri, Karnataka, on 30th and 31st January 2020. |
| 7 | Paper Published Titled “Optimization of Turning Process Parameters for Titanium Grade 5 using Taguchi Method”, Journal of Experimental & Applied Mechanics ISSN:2230-9845, (2019) ISSN:2321-516X Volume 10, Issue-2 16. Raghavendra M J and Dr. Ramachandra C G, “Influence of Machining cutting speed on cutting force, Tool flank wear on PVD inserts by Turning of Ti-6Al-4V alloy”, in AIP Conference Proceedings. ISSN 1551-7616, Volume No. 2204, January 2020 Page No. 10.1063/1.5141597 |
| 8 | Paper Published Titled “A study on usage of Total Productive Maintenance in selected SMEs”, IOP Conf. Series: Materials Science and Engineering 376 (2018) 012117 doi:10.1088/1757- 899X/376/1/012117. |
| 9 | Paper Published Titled “optimization of surface roughness in turning operation in machining of Ti-6Al-4V (Titanium grade 5)”, IOP Conf. Series: Materials Science and Engineering 376 (2018) 012118 doi:10.1088/1757-899X/376/1/012118. |
| 10 | Paper Published Titled “Wheelchair Cum Stretcher”, International Journal of Engineering Research & Technology (IJERT) ISSN: 2278-0181, Volume No.6 Issue No. 10, October-2017, Page No. 42-46. |
| 11 | Paper Published Titled “Design and Fabrication of Gear Cutting Attachment for Lathe”, International Journal of Engineering Research and Advanced Technology (IJERAT) ISSN: 2454-6135, Volume No.3 Issue No. 10, October-2017, Page No. 35-40. |
| 12 | Paper Published Titled “Experimental Study on 4- Stroke Petrol Engine Using Water Misting Kit”, International Journal of Advance Research in Science and Engineering (IJARSE) ISSN: 2319-8354, Volume No.6 Issue No. 09, September-2017, Page No. 712-718. |
| 13 | Paper Published Titled “Fabrication of air conditioner integrated with water cooler and water heater”, International Journal of Advances in Scientific Research & Engineering (IJASRE) ISSN: 2454-8006, Volume No.3 Issue No. 08, September-2017 Page No.10-16. |
| 14 | Paper Published Titled “Vibration Monitoring of Thread Line Mill in a Tyre Manufacturing Industry”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.174-178. |
| 15 | Paper Published Titled “Total Productive Maintenance – A Performance Enhancement Strategy for Manufacturing Industries”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.305-311. |
| 16 | Paper Published Titled “Determination of Flak Wear of a PVD Coated Carbide Tool by Condition Monitoring”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume Page 7 No.8, March 2017 Page No.108-113. |
| 17 | Paper Published Titled “Optimal Inspection Frequency of a Critical Machine in a Machine Tool Manufacturing Unit”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.179-182 |
| 18 | Paper Published Titled “OEE - A Tool to Measure the Effectiveness of TPM Implementation in Industries - A Review”, Global Research and Development Journal for Engineering (GRDJE) ISSN: 2455-5703 Volume No.1 Issue No. 12, November 2016 Page No.92-96. |
| 19 | Paper Published Titled “Effect of Total Productive Maintenance (TPM) Implementation in Manufacturing and Service Industries- A Review”, International Journal of Engineering Trends and Technology (IJETT), Spl. Issue, p-ISSN: 2349-0918, e-ISSN: 2231-5381, pp.346-350. |
| 20 | Paper Published Titled “A study on Different Tool Condition Monitoring System Available to Monitor Tool-Flank Wear”, International Journal of Engineering Trends and Technology (IJETT), Spl. Issue, p-ISSN: 2349-0918, e-ISSN: 2231-5381, pp.359-364. |
| 21 | Paper Published Titled “A Review on Tool Flank Wear Monitoring by Tool Condition Monitoring System using Various Approaches”, Global Research and Development Journal for Engineering (GRDJE) ISSN: 2455- 5703 Volume No.1 Issue No. 4, March 2016 Page No.07-13. |
Paper presented in conferences
| National Paper | |
| 1 | Presented a paper titled “optimization of Machining process parameters for Titanium grade-5 using Taguchi’s method”, at National conference on Recent Trends & Innovations in Mechanical Engineering & Technology (RTIMET-2019) Cambridge Institute of Technology, Bengaluru, Karnataka, India, 3-4 May 2019. |
| 2 | Presented a paper titled “optimization of turning process parameters for Titanium grade-5 using Taguchi’s method”, at National conference on Recent Advances in Mechanical Engineering and Technology (NCRAMET-19), Yenepoya Institute of Technology, Moodbidri, Mangaluru, Karnataka, India, 29-30 April 2019. |
| 3 | Presented a paper titled “Effect of Total Productive Maintenance Implementation in Manufacturing and Service Industries- A Review”, Proceedings of the National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016), Srinivas Institute of Technology, Valachil, Mangaluru, Karnataka, India, 6-7 May 2016. |
| 4 | Presented a paper titled “A study on Different Tool Condition Monitoring System Available to Monitor Tool-Flank Wear”, Proceedings of the National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016), Srinivas Institute of Technology, Valachil, Mangaluru, Karnataka, India, 6-7 May 2016 |
| Inter National Paper | |
| 1 | Paper Titled “Improvement of Performance and Efficiency of Modified Vertical Axis Wind Turbine By Implementing A Magnetic Propelling Phenomenon Of Permanent Magnets”, In International Journal Of Scientific Research In Engineering And Management (Ijsrem), Volume: 06 Issue: 07 | July - 2022 Impact Factor: 7.185 Issn: 2582-3930 |
| 2 | Paper Titled “Prevention of Railway Accidents by Automatic Gate Control using IoT”, in International Research Journal of Engineering and Technology (IRJET) Volume 8, Issue 8, August 2021 https://www.irjet.net/volume8-issue8 S.No: 474 |
| 3 | Paper Titled “Optimization of EDM Electrode by Direct Metal Laser Sintering (DMLS) method for SS316L Material in IOP Conference Series: Materials Science and Engineering. iopscience.iop.org/article/10.1088/1757-899X/1013/1/012001. |
| 4 | Paper Titled “Optimization of surface roughness of Titanium Gr-9 Alloy Turning using Taguchi method in IOP Conference Series: Materials Science and Engineering. iopscience.iop.org/article/10.1088/1757-899X/1013/1/012001. |
| 5 | Paper Titled “Tool Wear Behaviors of CVD -Coated Carbide Inserts During Dry Machining of Titanium Grade-5 (Ti-6Al-4V) Materials in International Journal of Electro Mechanics and Page 8 Mechanical Behavior. -ISSN: 2582-4120 Vol. 6: Issue 1, March 2020 Page No. V7I1303. |
| 6 | Paper Titled “Overall Equipment Effectiveness of a Mechanical Press in a Manufacturing Unit- A Case Study” in the Global Conference on “Advanced Smart and Sustainable Technologies in Engineering (GCASSTE-2020)”, organized by Mangalore Institute of Technology & Engineering, Moodbidri, Karnataka, on 30th and 31st January 2020. |
| 7 | Paper Titled ““Optimization of Turning Process Parameters for Titanium Grade 5 using Taguchi Method”, Journal of Experimental & Applied Mechanics ISSN:2230-9845, (2019) ISSN:2321-516X Volume 10, Issue-2 16. Raghavendra M J and Dr. Ramachandra C G, “Influence of Machining cutting speed on cutting force, Tool flank wear on PVD inserts by Turning of Ti-6Al-4V alloy”, in AIP Conference Proceedings. ISSN 1551-7616, Volume No. 2204, January 2020 Page No. 10.1063/1.5141597 |
| 8 | Paper Titled “A study on usage of Total Productive Maintenance in selected SMEs”, IOP Conf. Series: Materials Science and Engineering 376 (2018) 012117 doi:10.1088/1757- 899X/376/1/012117. |
| 9 | Paper Titled “optimization of surface roughness in turning operation in machining of Ti-6Al-4V (Titanium grade 5)”, IOP Conf. Series: Materials Science and Engineering 376 (2018) 012118 doi:10.1088/1757-899X/376/1/012118. |
| 10 | Paper Titled “Wheelchair Cum Stretcher”, International Journal of Engineering Research & Technology (IJERT) ISSN: 2278-0181, Volume No.6 Issue No. 10, October-2017, Page No. 42-46. |
| 11 | Paper Titled “Design and Fabrication of Gear Cutting Attachment for Lathe”, International Journal of Engineering Research and Advanced Technology (IJERAT) ISSN: 2454-6135, Volume No.3 Issue No. 10, October-2017, Page No. 35-40. |
| 12 | Paper Titled “Experimental Study on 4- Stroke Petrol Engine Using Water Misting Kit”, International Journal of Advance Research in Science and Engineering (IJARSE) ISSN: 2319-8354, Volume No.6 Issue No. 09, September-2017, Page No. 712-718. |
| 13 | Paper Titled “Fabrication of air conditioner integrated with water cooler and water heater”, International Journal of Advances in Scientific Research & Engineering (IJASRE) ISSN: 2454-8006, Volume No.3 Issue No. 08, September-2017 Page No.10-16. |
| 14 | Paper Titled “Vibration Monitoring of Thread Line Mill in a Tyre Manufacturing Industry”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.174-178. |
| 15 | Paper Titled , “Total Productive Maintenance – A Performance Enhancement Strategy for Manufacturing Industries”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.305-311. |
| 16 | Paper Titled “Determination of Flak Wear of a PVD Coated Carbide Tool by Condition Monitoring”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume Page 7 No.8, March 2017 Page No.108-113. |
| 17 | Paper Titled “Optimal Inspection Frequency of a Critical Machine in a Machine Tool Manufacturing Unit”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.179-182. |
| 18 | Paper Titled ,“OEE - A Tool to Measure the Effectiveness of TPM Implementation in Industries - A Review”, Global Research and Development Journal for Engineering (GRDJE) ISSN: 2455-5703 Volume No.1 Issue No. 12, November 2016 Page No.92-96. |
| 19 | Paper Titled “Effect of Total Productive Maintenance (TPM) Implementation in Manufacturing and Service Industries- A Review”, International Journal of Engineering Trends and Technology (IJETT), Spl. Issue, p-ISSN: 2349-0918, e-ISSN: 2231-5381, pp.346-350. |
| 20 | Paper Titled “A study on Different Tool Condition Monitoring System Available to Monitor Tool-Flank Wear”, International Journal of Engineering Trends and Technology (IJETT), Spl. Issue, p-ISSN: 2349-0918, e-ISSN: 2231-5381, pp.359-364. |
| 21 | Paper Titled “A Review on Tool Flank Wear Monitoring by Tool Condition Monitoring System using Various Approaches”, Global Research and Development Journal for Engineering (GRDJE) ISSN: 2455- 5703 Volume No.1 Issue No. 4, March 2016 Page No.07-13. |
Workshop/Seminar attended/Guest lectures delivered
| 1 | Chaired a technical Session at the national conference “Multidisciplinary conference on engineering science & technology” MCEST-2022, Organised by SCEM, Mangalore in collaboration with ICT Academy India, 27th & 28th may 2022. |
| 2 | Guest Lecture Talk on “Application of Minitab software for optimization problems”, Invited talk, Dept of Mechanical Engg and ISTE, PA College of Engineering, Mangaluru, Karnataka, India, 30 may 2022. |
| 3 | Session Chaired at the International conference “Recent Trends in Mechanical engineering science” (RTIMES-2022), organized by Srinivas Institute of Technology, Valachil, Mangaluru, Karnataka, India, 10th and 11th June 2022. |
| 4 | Participated in Faculty Development Program A five –day live webinar series on faculty development program on “sustainable energy solutions in solar energy applications” organized by Mangalore Institute of Technology and Engineering, Moodbidri from 23th to 27th June2020. |
| 5 | Participated in Faculty Development Program A five –day live webinar series on faculty development program on “A paradigm shifts in management” organized by Ballari Institute of Technology and management, Bellary from 16th to 20th June2020 |
| 6 | Participated in Faculty Development Program A five-day webinar series on “Advance in Dynamics materials and research” organized by Rohini college of engineering and technology, Tamil nadu from 20th to 24th June 2020. |
| 7 | Participated in Faculty Development Program A Three-day online faculty development program on “Advance in machining process “organized by PES institute of technology and Management, shivamogga on 17th to 19th June 2020. |
| 8 | Participated in Faculty Development Program A one-week webinar on “Industry 4.0” organized by Nagarjuna college of engineering and technology in associated with MHRD and IIC from 8th to 12th June 2020. |
| 9 | Participated in Faculty Development Program One-week online faculty development program on “Energy Management System” organized by RMD engineering college, Tiruvallur on 8th to 13th June 2020. |
| 10 | Participated in Faculty Development Program Seven-days online Faculty development program on Cummins webclave on “Thought for a comprehensive IT future” organized by IEEE and Page 6 Cummins college of Engineering, Nagpur on 29th May to 04st June 2020. |
| 11 | Participated in Faculty Development Program Seven-days online Faculty development program on “Renewable Energy Sources: A way Ahead” organized by American society of materials at Cummins college of Engineering, Nagpur on 15th to 21st May 2020. |
| 12 | Participated in Faculty Development Program one-day webinar on “GRAPHENE-the Future materials at Cambridge institute of technology, Bengaluru on 18th May 2020. |
| 13 | Participated in Faculty Development Program A Four-days online workshop for faculty development Programme on “LaTeX” organized by MIT college of Railway engineering and research, Barshi on 14th to 17th May 2020. |
| 14 | Participated in Faculty Development Program online faculty development Programme on “contemporary tools and techniques for teachers and researchers in higher education: experience of using virtual class rooms at Cambridge institute of technology, Bengaluru on 09th May 2020. |
| 15 | Participated in Faculty Development Program A Two-week Online Faculty Development Programme on “LaTeX” organized by Gopalan college of engineering and management, Bangalore on 17th to 30th April 2020. |
| 16 | Participated in Faculty Development Program Two-days IQAC-AICTE Sponsored Workshop on “Accreditation Process NBA”, organized by RV college of Engineering and Srinivas Institute of Technology, Mangaluru. |
| 17 | Participated in Faculty Development Program One-week Faculty Development program on “Fundamentals of Manufacturing Processes”, organized by NPTEL-AICTE through MOOCs mode. |
| 18 | Participated in Faculty Development Program . Three-day Faculty TEQIP Sponsored Workshop on “Intelligent Optimization Techniques for Engineering Problems”, organized by Department of Mechanical engineering, National Institute of Technology, Karnataka, Surathkal, on 19th to 21st August 2019. |
| 19 | Participated in Faculty Development Program A Three-Day International Workshop on “INDUSTRIAL AUTOMATION & APPLICATIONS OF IoT”, organized by Department of Marine Engineering, Srinivas Institute of Technology, Mangaluru, from July 25th to 27th 2019”, |
| 20 | Participated in Faculty Development Program Two days’ Workshop on “Recent Developments in Mechanical Engineering” Conducted by Berary’s Institute of technology, Mangaluru during 1 April 15th & 16th 2019. |
| 21 | Participated in Faculty Development Program Two days’ Workshop on “Intellectual Property Rights (IPR)” organized by KSCST-SU-IPR cell in association with Patent Information cell(PIC) KSCST, Bengaluru conducted by Srinivas university, Mukka during February 20th & 21st 2019 |
| 22 | Participated in Faculty Development Program o day’s National level workshop on Advances in Machining Processes AIMP 2018 Conducted by Srinivas Institute of Technology, Mangaluru during August 17th & 18th 2018. |
| 23 | Participated in Faculty Development Program one-week QIP Short term course on “Analysis of Sheet -metal forming Processes” Conducted by IIT Bombay during May 7-11,2018. |
| 24 | Participated in Faculty Development Program Three-day Faculty Development Programme organized by department of marine engineering, Srinivas institute of technology, Mangaluru, on 11th to 13th April 2018. |
| 25 | Participated in Faculty Development Program One Day International Workshop on “Effective Research-Proposals, Investigations & Publications” organized by St Joseph Engineering College, Mangaluru on 11th August-2017. |
| 26 | Participated in Faculty Development Program . One-day workshop on conflicting roles and commitment of Teachers in higher education- A Neuro-science perspective organized by Department of MBA, Srinivas institute of Technology, Mangaluru, on 25th April 2017 |
| 27 | Participated in Faculty Development Program One-day National Level ISTE Faculty Development Programme on “Writing Research Proposal” organized by SDM Institute of Technology, Ujire, on 5th November, 2016. |
| 28 | Participated in Faculty Development Program Two-Day Training Programme on “Basics of Vibration and Condition Monitoring of Rotating Machines” organized by Mangalore Institute of Technology and Engineering, Moodbidri and Diagnostics Engineers, Bengaluru, on 24th and 25th October, 2016 |
| 29 | Participated in Faculty Development Program . A Three-Day International Workshop on “Research, Writing and Publishing (EUREKA)”, organized by Centre of Excellence for Research and Innovation, P.A. College of Engineering, Mangaluru, from September 1-3, 2016. |
| 30 | Participated in Faculty Development Program A Three-Day Workshop on “Research Methodologies and Latex”, organized by VTU e-Learning Centre, Mysuru, at Mangalore Institute of Technology and Engineering, Moodbidri from 19-21 July, 2016. |
| 31 | One Day Workshop on “Recent Advances in Bio-fuels and I.C Engines (RABFICE-2014)” organized by Srinivas Institute of Technology, Valachil, Mangalore on 3rd December 2014. |
| 32 | Participated in FDP A Two-week ISTE Workshop on “Engineering mechanics” at Srinivas Institute of Technology, Mangalore conducted by IIT-Bombay on 26th Nov to 06th Dec, 2014. |
| 33 | Participated in Faculty Development Program “A Two-week ISTE Workshop on “Fluid mechanics” at Srinivas Institute of Technology, Mangalore conducted by IIT-Bombay on 26th May to 05th June, 2014. |
Patents & Books
| 1 | Published a book elaboration Titled “Marine Manufacturing Technology” With ISBN: 978-620-0-5483-5, Lambert Academic Publisher, Germany. |
| 2 | Published a book elaboration Titled “Investigation on Influence of Turning Parameters for Titanium Alloy” With ISBN: 978-620-4-71481-3, Lambert Academic Publisher, Germany. |
| 3 | Published a book elaboration Titled “Optimization of surface roughness of Titanium Gr-9 Alloy Turning using Taguchi method” With Mater. Sci. Eng. 1013 012001. |
Projects Guided
| 1 | B.E projects | 18 |
| 2 | M.Tech projects | 02 |
Membership in professional bodies
| 1 | SMISME(SMISME201703292007)-Life Member of “Indian Society of Mechanical Engineers” |
| 2 | IAENG (Member No: 191030)-Life Member of “INTERNATION ASSOCIATION OF ENGINEERS” |
| 3 | MIFERP(PMIN35871942)-Life Member of “Institute for Engineering Research and Publication” |
| 4 | MISRPM(Malaysia) (Member no:1819005)-Life Member of “Malaysia India - Innovative Scientific Research Professional” |
| 5 | MSIESRP(Member no:17181916)-Life Member of“Membership Information - Innovative Scientific Research” |
Departmental Responsibilities
| 1 | Faculty Coordinator for sASMA-All student mechanical association. |
| 2 | Intellectual property rights-member |
Awards/Achievements
| 1 | Received Best Paper Award for Research paper presented at the International Conference on Advances in Manufacturing, Materials & Energy Engineering (Icon MMEE-2018), Mangalore institute of technology and engineering, Mangalore and jointly patronized by Binghamton University, state university of New York, USA, 2-3 march2018. Raghavendra M J, Ramachandra C G, T R Srinivas and Prashanth Pai M “optimization of surface roughness in turning operation in machining of Ti-6Al-4V (Titanium grade 5)”. |
Contact Details
| Email ID(Official) | raghavendra.ram@sitmng.ac.in |
