Degree | Institution | Specialization | University | Year |
B.E | Moodlakatte Institute of Technology, Kundapura | Mechanical Engineering | VTU | 2009 |
M.Sc(Engg) | VTU RRC, Belagavi | Composite Material | VTU | 2019 |
Ph.D. | VTU RRC, Belagavi | Composite Material | VTU | Pursuing |
Field | Designation | Workplace | From | To |
Teaching | Asst. Professor | Srinivas Institute of Technology, Mangaluru | 2011 | Till date |
Elements of Mechanical Engineering , Engineering Visualization , Computer Aided Machine Drawing , Computer Aided Marine Engineering Drawing , Mechanics of Materials , Kinematics of Machines , Design of Machine Elements-I , Design of Machine Elements-II , Basic Thermodynamics , Applied Thermodynamics , Management and Engineering Economics , Operations management , Manufacturing Process-I , Manufacturing Process-II , Metrology & Mechanical Measurement |
Design of Elements , Composite Materials , Analysis of Mechanical Elements , Mechanisms of Machines |
International Journal | |
1 | Published a journal titled “Determination of Tensile Properties of Sugarcane Bagasse Fiber Reinforced with Different Proportions of Polymer Composite”, in International Journal of Advance Research, Ideas and Innovations in Technology, Volume -5, Issue-3, ISSN 2454-132X., May – June 2019. |
2 | Published a journal titled “A Review on Effect of Chemical Modification on Mechanical Properties of Sugarcane Bagasse Fiber Polymer Composites”, International Journal of Engineering Trends and Technology, Special Issue NCAMES Part-III, P-ISSN 2349-0918., May, 2016. |
3 | Published a journal titled “Study of EDM Parameters on Surface Finish of Hot Die Steel- H13”, International Journal of Engineering Trends and Technology, Special Issue NCAMES Part-III, P-ISSN 2349-0918., May, 2016. |
National Paper | |
1 | Sudheendra H.N. Chandra Jogi, “A Review on Effect of Chemical Modification on Mechanical Properties of Sugarcane Bagasse Fiber Polymer Composites”, Proceedings of National Conference on Advances in Mechanical Sciences, (NCAMES-2016), organized by department of mechanical engineering held on 6th and 7th May, 2016 at Srinivas Institute of Technology, Mangaluru. |
2 | Chandra Jogi. Sudheendra H.N., “Study of EDM Parameters on Surface Finish of Hot Die Steel- H13”, Proceedings of National Conference on Advances in Mechanical Sciences, (NCAMES-2016), organized by department of mechanical engineering held on 6th and 7th May, 2016 at Srinivas Institute of Technology, Mangaluru. |
Inter National Paper | |
1 | Presented a paper, titled “Design and Fabrication of Areca nut Insecticide Spraying Machine”, in International Conference on Recent Trends in Mechanical Engineering Emerging Trends in Engineering RTIMES-2022 held at Srinivas Institute of Technology, Valachil, Mangaluru on 10th and 11th June 2022 |
2 | Presented a paper, titled “Analysis of Composite Material for Industrial Robotic Arm”, in International Conference on Recent Trends in Mechanical Engineering Emerging Trends in Engineering RTIMES-2022 held at Srinivas Institute of Technology, Valachil, Mangaluru on 10th and 11th June 2022. |
3 | Presented a paper “Determination of Tensile Properties of Sugarcane Bagasse Fiber Reinforced with Different Proportions of Polymer Composite”, in International Conference on Recent Trends in Mechanical Engineering Emerging Trends in Engineering ICETE-2018 held at NMAMIT-Nitte on 14th and 15th May 2018. |
1 | Attended Seven Days National Level Virtual FDP on “ICT- Tools – The Emerging Trends of Teaching”, organized by Besant Women’s College, Mangaluru from 24th to 30th August 2021. |
2 | Attended One Week AICTE sponsored online STTP – Phase-II on “Innovations and Challenges in Industry 4.O Automation and Smart Manufacturing”, organized by department of Mechanical Engineering, Kallam Haranadhareddy Institute of Technology, Guntur from 28th June to 3rd July 2021. |
3 | Attended one week Short Term Training Programme on “Innovative Approaches in Teaching Pedagogy – Phase-II” Sponsered by AICTE and organized by Sahyadri College of Engineering and Management, Mangaluru from 14th to 19th June 2021 |
4 | Attended one day Faculty development Programme on “Placement is a Process, not an Event”, organized by IQAC – SIT Valachil, Mangaluru on 19th March 2021. |
5 | Attended Three days online National FDP / SDP on “Developments in Reducing Environmental Pollution: Bio-Fuels & Thermoacoustic Refrigeration” organized by Rao Bahadur Y Mahabaleshwarappa Engineering College, Cantonment, Ballari, from 29th -31st July 2020 |
6 | Attended one Week Online FDP On “Effective Research Writing Using Latex”, Organized by Department of Mechanical Engineering, In Association With Spoken Tutorial, IIT Bombay from 22nd to 27th June 2020 |
7 | Attended three Days Online Faculty Development Programme on “PLC Programming and Industrial Interface” Organized In Association With Indwell Automation – Pune from 22-24th June 2020. |
8 | Attended Five Days FDP on “A Paradigm Shift In Management”, Organized By Department Of Mechanical Engineering, Ballari Institute Of Technology And Management, Ballari from 16th -20th June 2020. |
9 | Attended Two Days National Workshop on “Advances in Machining Processes” organized by the department of mechanical engineering held at SIT Mangaluru during 18-19 August 2018. |
10 | Attended Three Days Faculty development programme on “Recent Trends in Industrial Practices RTIP-2018 ” organized by marine engineering department held at SIT Mangaluru during 11-13 April 2018. |
11 | Attended Three Days National Workshop on “Laser Processing of Materials” sponsored by TEQIP-II held at NITK Surathkal from 9th to 11th March 2017. |
12 | Attended Two Days Workshop on “Advanced Materials” held at SIT Mangaluru during 29th & 30th July 2016. |
13 | Attended Three Days Training program on “Research Methodologies & Latex” held at Shree Devi Institute of Technology, Mangaluru, Organized by VTU e-Learning Centre, Mysuru on 9th to 11th September 2014. |
14 | Attended Two Week ISTE Workshop on “Fluid Mechanics” conducted by IIT Kharagpur held at SIT Mangaluru from 20th to 30th May 2014 |
15 | Attended Two Week ISTE Workshop on “Engineering Mechanics” conducted by IIT Bombay held at SIT Mangaluru from 26th Nov to 06th December 2013 |
16 | Attended Two Week ISTE Workshop on “Engineering Thermodynamics” conducted by IIT Bombay held at SIT Mangaluru from 11th to 21st December 2012. |
17 | Attended Two Days Faculty Development Programme on “ Multibody Dynamics” Conducted by VTU Belgaum held at VTU Regional office, Vidya Vardhaka College of Engineering Mysuru on 2nd & 3rd Feb 2012. |
18 | Attended Two Day Faculty Development Programme on “Recent Developments in Alternative Energy Technologies” sponsored by VTU Belagaum held at SIT Mangaluru on 18th & 19th October 2011 |
19 | Attended Five Days Summer School Sponsored by AICTE – MHRD on “Effective Teaching Methodologies – Statics ETMS-10” jointly organized by NITK Surathkal and Michigan State University USA, held at NITK Surathkal from 10th to 14th May 2010. |
1 | B.E projects | 20 |
2 | M.Tech projects | 1 |
1 | International Association of Engineers (IAENG) 305434 |
2 | World Economics Association |
3 | Institute of Research Engineers and Doctors AM20220220340 |
1 | Placement committee. |
2 | Coordinator for Aisiri Kannada Sangha |
3 | NSS Committee |
1 | Won the 1st place in Shimoga District Level in Essay writing titled “Parisara Samrakshaneyalli vidyarthigala Pathra” held at Shimoga. |
2 | Won the 1st place in Thirthahalli Taluk Level in Essay writing titled “Parisara Samrakshaneyalli vidyarthigala Pathra” held at Thirthahalli. |
3 | Maintained a YouTube Channel “SUDHEENDRA H N” to support students for their academics. |
Email ID(Official) | sudheendra.mech@sitmng.ac.in |